Product description (A27-LCD Aqua UVtron for the disinfection of drinking water up to 38°C DVGW / ÖVGW-certified):
- Electro polished stainless steel chamber 316L V4A 1.4404 with stainless steel sample taps at the entrance and exit of the system, mounted UV sensor holder with selective UV-C sensor at 254 nm according to DVGW W-294 and Ö-Norm 5873-1, vent and drain plug, in build turbulator, UV-C amalgam low pressure lamp build in hard quartz sleeve F240.
- Microprocessor controlled monitor with backlight alphanumeric LCD display for the indication of the absolute measured UV-C intensity in W/m2, operational hours, Start-up and power failure counter displayed in addition to, optional measured water flow and water temperature. LED’s for “Operation”, “Cleaning” and “Fault” signalization and ON/OFF button, input contacts for remote ON/OFF, potential free relay contacts for pre-alarm and alarm, 4 – 20 mA signal output proportional to the measured UV-C Intensity. Relay output contacts for the control of a flush valve depending on the temperature threshold programmed.
UV-systems with higher flow:
A46-LCD Aqua UVtron: Nominal flow 3.7 m³/h, power consumption 80 W, hydraulic connection R 1 1/2 AG; Article number 880482
A90-LCD Aqua UVtron: Nominal flow 10,2 m³/h, power consumption 150 W, hydraulic connection R 1 1/2 AG; Article number 880485
A180-LCD-F Aqua UVtron: Nominal flow 18,9 m³/h, power consumption 230 W, hydraulic connection DN 65; Article number 880488
A300-LCD-F Aqua UVtron: Nominal flow 26.3 m3/h, power consumption 265 W, hydraulic connection DN 80; Article number 880491